| Author |
 Topic  |
|
|
Sideways_Mk1
Starting Member
Barbados
29 Posts |
 Posted - 27 August 2004 : 11:44:51 PM
|
Does anyone know about this company that made/make 2lt camshafts?
i have a kit i just found when rebuilding another 2lt engine, the cam followers have '3844' marked on them along with the camtech stamp while the camshaft just has 's-723' stamped on the back.
info on this kit would be very much appreciated.
thanks alot.
When in doubt Floor it!
|
Edited by - Sideways_Mk1 on 27 August 2004 11:48:20 PM
|
|
|
RM in Adelaide
Moderator
Australia.
2372 Posts |
Posted - 28 August 2004 : 2:16:03 PM
|
723 could be a copy of one of the major manufactureres cams.
Their rockers are out of production, at moment.
Camtec rockers are good quality, if still ok.
The next alternative is Crow rockers :-
"Crow rockers are $30.00 each and are German made."
Contact info
Camtech OZ
15/20 Alfred Road
Chipping Norton
New South Wales
2170
PH 02 9755 3101
Fax
02 9755 3144
No web site, that I can see
I have a catalogue, but above is all the info in it on the pinto cams.
.
RM in Adelaide
|
Edited by - RM in Adelaide on 28 August 2004 10:19:03 PM |
 |
|
|
synapse
Forum User
Australia
1174 Posts |
Posted - 28 August 2004 : 4:18:39 PM
|
I thought Camtech had more cams that that? or are the rest all copies? if so do they list what copies they have?
 Ashley.
------------------------------
'68 Mk2 Cortina - 2L SOHC Pinto |
|
|
|
RM in Adelaide
Moderator
Australia.
2372 Posts |
Posted - 28 August 2004 : 9:39:41 PM
|
86 pages in the catalogue.
Only one dedicated to pintos
.
RM in Adelaide
|
|
|
|
Sean
Forum User
Australia
473 Posts |
Posted - 29 August 2004 : 11:29:42 AM
|
I have a Camtech cam... Part No.726. Its not on the list 
Sean
 |
|
|
|
grantS
Forum User
Australia
978 Posts |
Posted - 04 October 2004 : 6:28:26 PM
|
I'm after some info too,
Cam has ZC369C stamped under the "camtech" on the cam.
and this other stuff at the end z4915 and OBB2850O
and info on it would be great
Cheers Grant |
|
|
|
RM in Adelaide
Moderator
Australia.
2372 Posts |
Posted - 05 October 2004 : 09:10:10 AM
|
quote:
[i]Originally posted by grantS[/i]
[br]I'm after some info too,
Cam has ZC369C stamped under the "camtech" on the cam.
and this other stuff at the end z4915 and OBB2850O
and info on it would be great
Cheers Grant
This numbers cast into the cam do little to identify it.
The numbers STAMPED into the rear of it usually identify it.
Having said that....Yours is not on list.
I suggest to phone Camtech.
.
RM in Adelaide
|
|
|
|
grantS
Forum User
Australia
978 Posts |
Posted - 05 October 2004 : 4:02:04 PM
|
It's also a cross drilled cam, how can i post some pictures of it?
Cheers Grant |
|
|
|
RM in Adelaide
Moderator
Australia.
2372 Posts |
|
|
2lt_Scort
Forum User
Australia
412 Posts |
Posted - 09 October 2004 : 10:22:13 AM
|
I was looking at my cam yesterday and it has the same markings on it (made in usa and ep something .....) but cam is a kent FR32, has FR32 stamped in end. I thought kent cams were english?
Rhys |
|
|
|
1980rs
Forum User
114 Posts |
Posted - 16 December 2005 : 3:12:35 PM
|
Just to drag this thread back up, I also have a cam stamped s 723, what conclusion was reached? Is it a camtech cam, is it possible that it is camtech ct26 723?
Any help much appriciated
Andrew |
|
|
|
RM in Adelaide
Moderator
Australia.
2372 Posts |
Posted - 18 December 2005 : 7:16:18 PM
|
Contact info
Camtech OZ
15/20 Alfred Road
Chipping Norton
New South Wales
2170
PH 02 9755 3101
Fax
02 9755 3144
.
RM in Adelaide
Click to send Email
|
|
|
| |
Topic |
|
Camtech
Forum Locked
